Added value
- Curved back combined with an even number of pegs in the back to provides free space for the spine and best comfort
- Generous measurements suit more kinds of people
- Related to the armchair Sture and the armchair Curt
- Hangable
- Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Accessories
- Frame in clear lacquer, white or black (standard)
- Frame in any color (special)
- Shaped sheepskin
- Sliding wheels
- Available in wooden (195) and fixed upholstered seat (185)
Reuse
- Solid wood
Specifications
Height84 cm
Width53 cm
Depth56 cm
Seat height46 cm
Seat depth39 cm
Arm height66 cm
Views
Any color available as
an option on this product.
Downloads
Environmental documents
Filer
BIM-object
Product sheet
Care instructions for this piece of furniture
Wood
Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:
- Screws need to be re-tightened regularly, at least once a year.
- Solid table tops can naturally warp by up to 0.5%.
- Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.
- Spills of coffee and other liquids need to be wiped up immediately.
- For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
- For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.
Fabric
- Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
- Vacuuming with a soft nozzle is often sufficient for cleaning.
- Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
- Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
- If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.
Plastic
For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.
Metal
- For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
- For heavily soiled surfaces, a cloth moistened with alcohol can be used.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Laminate
Laminates are very durable surfaces that fit well in public environments.
- Daily cleaning with a dry cloth.
- For more difficult stains, non-abrasive cleaners can be used.
- Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
- Rings and streaks that form on the surface are most easily removed with window cleaner.
- Do not use scouring pads or steel wool as this will cause scratches.
- Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Leather
If you take care of the leather in the right way, it will become more beautiful over the years.
- Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
- Vacuum the furniture to remove loose dirt and dust.
- Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
- Water-based leather care products extend the lifespan.
Glass
Cleaned with window cleaner or washing-up liquid diluted in water.
Björn 195
Armchair
The Björn series consists of four chairs: two without armrests and two with armrests, with each chair available with either a wooden seat or an upholstered seat.
It is a peg chair with a prominent detail at the top of the backrest that stabilizes the rods. The chair with armrests can be hung for easy storage.
Björn is well suited as a dining chair in healthcare and care environments, as well as in cafés, restaurants, and schools.
The chair is made from solid birch and is labeled with FSC® mix and Möbelfakta. It is offered as standard in clear lacquer, white, or black, and is also available in any custom color on request.
Design: Björn Dahlström
Any color available as
an option on this product.
Added value
- Curved back combined with an even number of pegs in the back to provides free space for the spine and best comfort
- Generous measurements suit more kinds of people
- Related to the armchair Sture and the armchair Curt
- Hangable
- Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Accessories
- Frame in clear lacquer, white or black (standard)
- Frame in any color (special)
- Shaped sheepskin
- Sliding wheels
- Available in wooden (195) and fixed upholstered seat (185)
Reuse
- Solid wood
Specifications
Height84 cm
Width53 cm
Depth56 cm
Seat height46 cm
Seat depth39 cm
Arm height66 cm
Views
Any color available as
an option on this product.
Downloads
Environmental documents
Filer
BIM-object
Product sheet
Care instructions for this piece of furniture
Wood
Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:
- Screws need to be re-tightened regularly, at least once a year.
- Solid table tops can naturally warp by up to 0.5%.
- Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.
- Spills of coffee and other liquids need to be wiped up immediately.
- For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
- For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.
Fabric
- Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
- Vacuuming with a soft nozzle is often sufficient for cleaning.
- Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
- Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
- If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.
Plastic
For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.
Metal
- For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
- For heavily soiled surfaces, a cloth moistened with alcohol can be used.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Laminate
Laminates are very durable surfaces that fit well in public environments.
- Daily cleaning with a dry cloth.
- For more difficult stains, non-abrasive cleaners can be used.
- Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
- Rings and streaks that form on the surface are most easily removed with window cleaner.
- Do not use scouring pads or steel wool as this will cause scratches.
- Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
- Disinfection can be done with alcohol if the surface is dried afterwards.
Leather
If you take care of the leather in the right way, it will become more beautiful over the years.
- Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
- Vacuum the furniture to remove loose dirt and dust.
- Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
- Water-based leather care products extend the lifespan.
Product designer and graphic designer
Björn Dahlström was born in 1957 in Stockholm, Sweden.
Similar products
Cirrus 612
Two-seater sofa
Cirrus 613
Three-seater sofa
Cirrus 611
Armchair
Nivå 603
Coffee table
Dahlia 820
Recliner
Humlan 774
Coffee table
Humlan 773
Coffee table
Amulett 738 PS
Footstool
Julia 764
Shelf
Freja 339 XL
Armchair with high back
Similar products
Woodstock 014
Chair with ribbed back
Tilt 070
Chair with swing
Rialto 438
Bar stool
Kurbits 326
Peg chair sofa
Kurbits 134
Armchair
Jackie 131
Chair
Humlan 370
Chair
Erik 463
Armchair
Björn 095
Chair
Alvastra 160
Armchair
Alva 172
Armchair with upholstered seat
Similar products
Rialto 438 high
High bar stool
Rialto 438
Bar stool
Rialto 437
Chair
Knut 121
Armchair with upholstered seat and back
Knut 021
Chair with upholstered seat and back
Knut 020
Chair with wooden seat
Jackie 1132 XL
Wide armchair
Freja 1166 XL
Wide armchair
Björn 185
Armchair with upholstered seat
Alvastra 160
Armchair
Alvastra 061
Chair