Classic chair with modern function and comfort
Gap between seat and frame for best hygiene
Removable upholstery
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139

Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Back cushion
Sliding wheels
Rubber fabric/hospital fabric (standard)
+5 cm seat height

Solid wood
Removable upholstery

Height86 cm

Width56 cm

Depth56 cm

Seat height46 cm

Seat depth41 cm

Arm height67 cm

Views

Care instructions for this piece of furniture

Wood

Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:

Screws need to be re-tightened regularly, at least once a year.
Solid table tops can naturally warp by up to 0.5%.
Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.

Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:

Spills of coffee and other liquids need to be wiped up immediately.
For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.

Fabric

Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
Vacuuming with a soft nozzle is often sufficient for cleaning.
Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.

Plastic

For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.

Metal

For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
For heavily soiled surfaces, a cloth moistened with alcohol can be used.
Disinfection can be done with alcohol if the surface is dried afterwards.

Laminate

Laminates are very durable surfaces that fit well in public environments.

Daily cleaning with a dry cloth.
For more difficult stains, non-abrasive cleaners can be used.
Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
Rings and streaks that form on the surface are most easily removed with window cleaner.
Do not use scouring pads or steel wool as this will cause scratches.
Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
Disinfection can be done with alcohol if the surface is dried afterwards.

Leather

If you take care of the leather in the right way, it will become more beautiful over the years.

Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
Vacuum the furniture to remove loose dirt and dust.
Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
Water-based leather care products extend the lifespan.

Glass

Cleaned with window cleaner or washing-up liquid diluted in water.

Elin 148

Name: Elin 148 | NC Nordic Care
SKU: 148

Armchair

Elin is a furniture family consisting of chairs, armchairs, and sofas that combine classic design with modern functionality and comfort. The distinctive cross-back design is a prominent feature throughout the range. The Elin chair is available both with and without armrests and features a gap between the seat and frame, making it easy to keep clean. It comes with a removable and washable upholstery cover, and elastic webbing is included as standard to ensure good hygiene. The Elin 148 model is also available with an extra-high seat height to improve accessibility.

Elin chair is well suited as a dining chair in healthcare and care environments.

The chair is made from FSC^®-certified birch and is certified with Möbelfakta. It is offered as standard in clear lacquer, white, or black, and is also available in any custom color on request.

Design: Marie Norell Möller

Classic chair with modern function and comfort
Gap between seat and frame for best hygiene
Removable upholstery
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139

Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Back cushion
Sliding wheels
Rubber fabric/hospital fabric (standard)
+5 cm seat height

Solid wood
Removable upholstery

Height86 cm

Width56 cm

Depth56 cm

Seat height46 cm

Seat depth41 cm

Arm height67 cm

Views

Environmental documents

Möbelfakta certificate

Sustainability declaration

FSC-cert

Filer

2D DWG

3D DWG

BIM-object

Download your bim objects here

Product sheet

Elin 148 Product sheet (PDF)