Offers many tactile materials
Gap between seat and back for best hygiene
Easy to get to under the armchair, which facilitates cleaning
Removable fabric
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Rubber fabric/hospital fabric

Solid wood
Removable upholstery
Replaceable padding

Height105 cm

Width68 cm

Depth78 cm

Seat height47 cm

Seat depth47 cm

Arm height62 cm

Views

Environmental documents

FSC-Cert

Möbelfakta certificate

Sustainability declaration

EPD

Filer

BIM-object

Product sheet

Freja 338 Product sheet (PDF)

Care instructions for this piece of furniture

Wood

Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:

Screws need to be re-tightened regularly, at least once a year.
Solid table tops can naturally warp by up to 0.5%.
Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.

Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:

Spills of coffee and other liquids need to be wiped up immediately.
For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.

Fabric

Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
Vacuuming with a soft nozzle is often sufficient for cleaning.
Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.

Plastic

For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.

Metal

For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
For heavily soiled surfaces, a cloth moistened with alcohol can be used.
Disinfection can be done with alcohol if the surface is dried afterwards.

Laminate

Laminates are very durable surfaces that fit well in public environments.

Daily cleaning with a dry cloth.
For more difficult stains, non-abrasive cleaners can be used.
Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
Rings and streaks that form on the surface are most easily removed with window cleaner.
Do not use scouring pads or steel wool as this will cause scratches.
Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
Disinfection can be done with alcohol if the surface is dried afterwards.

Leather

If you take care of the leather in the right way, it will become more beautiful over the years.

Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
Vacuum the furniture to remove loose dirt and dust.
Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
Water-based leather care products extend the lifespan.

Glass

Cleaned with window cleaner or washing-up liquid diluted in water.

Freja 338

Name: Freja 338 | NC Nordic Care
SKU: 338-1

Armchair with high back

Freja is a versatile furniture collection featuring armchairs, sofas, and chairs in various sizes and functions, where tactile materials create a varied yet harmonious and cohesive expression.

Freja armchair is available with a low or high back, as well as in an XL version, and features a clean design with slats in the back. For optimal hygiene, Freja has removable upholstery and a gap between the seat and back, reducing the risk of dirt and bacteria build-up. Freja 338 is tested for a user weight of up to 160 kg in accordance with Möbelfakta requirements.

Freja is well suited for public environments such as waiting rooms and lounges.

The armchair is made of FSC^®-certified birch and is certified with Möbelfakta. It is offered as standard in clear lacquer, white, or black, and is also available in any custom color on request.

Design: NC Design Studio

Offers many tactile materials
Gap between seat and back for best hygiene
Easy to get to under the armchair, which facilitates cleaning
Removable fabric
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Rubber fabric/hospital fabric

Solid wood
Removable upholstery
Replaceable padding