Creates a sense of home in public environments
Inclusive and embracing
Easy to get to under the armchair, which facilitates cleaning
Gap between seat, backrest, and armrest for optimal hygiene.
Removable upholstery
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in FSC^®-certified birch or oak
Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Rubber fabric/hospital fabric

Solid wood
Removable upholstery
Replaceable padding

Height84 cm

Width85 cm

Depth75 cm

Seat height47 cm

Seat depth52 cm

Views

Environmental documents

FSC-cert

Sustainability declaration

Möbelfakta certificate

Filer

2D DWG

3D DWG

BIM-object

Product sheet

Cirrus 611 Product sheet (PDF)

Care instructions for this piece of furniture

Wood

Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:

Screws need to be re-tightened regularly, at least once a year.
Solid table tops can naturally warp by up to 0.5%.
Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.

Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:

Spills of coffee and other liquids need to be wiped up immediately.
For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.

Fabric

Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
Vacuuming with a soft nozzle is often sufficient for cleaning.
Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.

Plastic

For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.

Metal

For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
For heavily soiled surfaces, a cloth moistened with alcohol can be used.
Disinfection can be done with alcohol if the surface is dried afterwards.

Laminate

Laminates are very durable surfaces that fit well in public environments.

Daily cleaning with a dry cloth.
For more difficult stains, non-abrasive cleaners can be used.
Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
Rings and streaks that form on the surface are most easily removed with window cleaner.
Do not use scouring pads or steel wool as this will cause scratches.
Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
Disinfection can be done with alcohol if the surface is dried afterwards.

Leather

If you take care of the leather in the right way, it will become more beautiful over the years.

Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
Vacuum the furniture to remove loose dirt and dust.
Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
Water-based leather care products extend the lifespan.

Glass

Cleaned with window cleaner or washing-up liquid diluted in water.

Cirrus 611

Armchair

Cirrus is a fully upholstered sofa series that strikes a clean balance between design, comfort, and functionality. It provides a soft, embracing feel without compromising on practicality, comfort, or durability. The series combines sleekness with plushness, with a design that conveys care and a balance between aesthetics and function. Cirrus is built with a focus on sustainability and circularity, allowing components to be replaced or repaired as needed. Its compact design also makes the sofa easy to place, even in smaller spaces. For optimal hygiene, Cirrus has removable and washable upholstery and is tested for a user weight of up to 160 kg in accordance with Möbelfakta requirements.

Cirrus is designed to meet the demands of healthcare and care environments, while maintaining a homely character that makes it equally suitable for all types of public spaces, from waiting areas to lounge settings.

Cirrus is made from FSC^®-certified birch and oak and is certified with Möbelfakta. It is offered as standard in clear lacquer, white, or black, and is also available in any custom color on request.

Design: Pierre Sindre

Creates a sense of home in public environments
Inclusive and embracing
Easy to get to under the armchair, which facilitates cleaning
Gap between seat, backrest, and armrest for optimal hygiene.
Removable upholstery
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in FSC^®-certified birch or oak
Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Rubber fabric/hospital fabric

Solid wood
Removable upholstery
Replaceable padding