Armchair with demands on comfort, hygiene and security
Generous, neat and easily placed
Inclusive and embracing
Gap between seat, back and frame for best hygiene
Removable upholstery
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in FSC^®-certified birch or oak
Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Rubber fabric/hospital fabric
Wheel
Footrest

Solid wood
Removable upholstery

Height120 cm

Width65 cm

Depth80 cm

Seat height47 cm

Seat depth46 cm

Views

Environmental documents

Möbelfakta certificate

Sustainability declaration

FSC-cert

Filer

2D DWG

3D DWG

BIM-object

Product sheet

Amulett 730 Product sheet (PDF)

Care instructions for this piece of furniture

Wood

Wood is a living material whose grain from the very beginning has a natural variation in pattern, color tone and luster. The wood is affected by, among other things, the season, heat and humidity. That wood is a living material means:

Screws need to be re-tightened regularly, at least once a year.
Solid table tops can naturally warp by up to 0.5%.
Light from the sun and lighting can cause permanent color and light differences in the surface, so allow the entire wooden surface to be exposed to the same amount of light.

Out of concern for the environment, we paint a large part of our range with water-based surface treatments. This means:

Spills of coffee and other liquids need to be wiped up immediately.
For cleaning, hand washing detergent or pH-neutral detergents and lukewarm water are recommended. Wipe off with clean water and wipe dry. Do not use cleaning agents that are alkaline, aggressive, contain abrasives or solvents.
For disinfection, non-alcohol-based agents are recommended, e.g. Virkon or DAX Alco Free. Alcohol-based agents must not be used.

Fabric

Removable and washable fabrics are washed according to washing instructions. These are sewn with a shrink seam, wash before use for optimal fit.
Vacuuming with a soft nozzle is often sufficient for cleaning.
Stains should always be removed as quickly as possible. In most cases, wiping with a damp cloth is sufficient, for more difficult stains, a pH-neutral detergent or a foam detergent for professional use can be used.
Always use white cloths and avoid wetting a woolen fabric to a greater extent, as this risks remaining stains.
If necessary, a foam detergent can also be used for a more thorough cleaning if this is allowed in the fabric's specification.

Plastic

For wiping, use a mild detergent without solvents or abrasives. Regular dish soap works well.

Metal

For regular cleaning, use a lightly moistened cloth with a mild detergent without solvents or abrasives.
For heavily soiled surfaces, a cloth moistened with alcohol can be used.
Disinfection can be done with alcohol if the surface is dried afterwards.

Laminate

Laminates are very durable surfaces that fit well in public environments.

Daily cleaning with a dry cloth.
For more difficult stains, non-abrasive cleaners can be used.
Hardly ingrained stains or discolorations can usually be removed by carefully using a cleaning agent with a mild abrasive action.
Rings and streaks that form on the surface are most easily removed with window cleaner.
Do not use scouring pads or steel wool as this will cause scratches.
Marker and ink marks can be removed with e.g. acetone or alcohol on a clean cloth.
Disinfection can be done with alcohol if the surface is dried afterwards.

Leather

If you take care of the leather in the right way, it will become more beautiful over the years.

Leather is heat sensitive. Therefore, direct sunlight and close contact with heating elements should be avoided.
Vacuum the furniture to remove loose dirt and dust.
Wipe the leather with a slightly damp cloth and a mild soapy solution can be used for cleaning.
Water-based leather care products extend the lifespan.

Glass

Cleaned with window cleaner or washing-up liquid diluted in water.

Amulett 730

Name: Amulett 730 | NC Nordic Care
SKU: 730

Armchair

Amulett with covered frame is available in two variants: 730, which is fixed, and 735, which is adjustable.

Amulett family consists of inclusive and embracing armchairs and a footstool, designed to perform in environments with very high demands on comfort, hygiene, and safety. The responsive design language, combined with softly shaped armrests and natural materials, creates a strong tactile experience. Amulett is generous yet compact and easy to place. For optimal hygiene, Amulett features removable upholstery and a gap between the seat, back, and armrests to prevent dirt and bacteria from accumulating. Amulett is tested for a user weight of up to 160 kg in accordance with Möbelfakta requirements.

Amulett is well suited for healthcare and care environments.

The armchair is made of FSC^®-certified birch and oak and is certified with Möbelfakta. It is offered as standard in clear lacquer, white, or black, and is also available in any custom color on request.

Design: Studio JOOY

Armchair with demands on comfort, hygiene and security
Generous, neat and easily placed
Inclusive and embracing
Gap between seat, back and frame for best hygiene
Removable upholstery
Tested for public use and meets the requirements for durability & safety, set forth in the following standard, EN 16139
Tested for 160kg

Frame in FSC^®-certified birch or oak
Frame in clear lacquer, white or black (standard)
Frame in any color (special)
Choice of fabric
Rubber fabric/hospital fabric
Wheel
Footrest

Solid wood
Removable upholstery